Authorพิเชษฐ์ พหุพงศ์ทรัพย์
Titleผลของการเติมผลึกเหลวมวลโมเลกุลต่ำต่อการเป็นเนื้อเดียวกัน ของพอลิเมอร์ผสมซินดิโอแทกติกพอลิสไตรีน / พิเชษฐ์ พหุพงศ์ทรัพย์ = Effects of low molar mass liquid crystal addition on the miscibility of syndiotactic polystyrene blends / Pichet Pahupongsab
Imprint 2547
Connect tohttp://cuir.car.chula.ac.th/handle/123456789/1715
Descript xvii, 134 แผ่น : ภาพประกอบ

SUMMARY

This research is concerned with studying the miscibility of syndiotactic polystyrene (SPS) blend with several polymers such as poly(alpha-methyl styrene) (PaMS), poly(ethyl methacrylate) (PEMA), poly(n-butyl methacrylate) (PBMA), poly(cyclohexyl acrylate) (PCHA), poly(cis-isoprene) (PIP) and poly(vinyl methyl ether) (PVME). SPS synthesized by using metallocene catalyst and modified-methylaluminoxane (MMAO) as cocatalyst. From the experimental results, it was found that the SPS can be miscible with PaMS, PEMA, PBMA, PCHA and PIP but it can not be miscible with PVME. Furthermore, the study concerned with the effect of addition cyclohexylbiphenylcyclohexane (CBC-33) and glycerol monostearate (GMS) on thermal properties and the crystallinity of blended polymer. The results showed that CBC-33 and GMS can also slightly decrease melting temperature (T[subscript m]) of the blends because they reduce melt viscosity of the blends, therefore the crystal of the blends will melt easier and form to crystalline slowly which correspond with depression of T[subscript c].
งานวิจัยนี้ มุ่งเน้นที่จะศึกษาเกี่ยวกับการผสมเข้ากันได้ของซินดิโอแทกติกพอลิสไตรีน (SPS) กับพอลิเมอร์ตัวอื่น เช่น พอลิแอลฟาเมทธิลสไตรีน (PaMS), พอลิเอทธิลเมธาคริเลต (PEMA), พอลิบิวธิลเมธาคริเลต (PBMA), พอลิไซโคลเฮกซิลอะคริเลต (PCHA), พอลิไอโซพรีน (PIP) และพอลิไวนิลเมทธิลอีเธอร์ (PVME) โดยซินดิโอแทกติกพอลิสไตรีนสังเคราะห์ด้วยตัวเร่งปฏิกิริยาเมทัลโลซีนและเมทธิลอะลูมินอกเซนที่ปรับปรุงแล้วเป็นตัวเร่งปฏิกิริยาร่วม (MMAO) จากผลการทดลองพบว่า ซินดิโอแทกติกพอลิสไตรีนสามารถผสมเข้ากันได้กับพอลิแอลฟาเมทธิลสไตรีน, พอลิเอทธิลเมธาคริเลต, พอลิบิวธิลเมธาคริเลต, พอลิไซโคลเฮกซิลอะคริเลต และพอลิไอโซพรีน แต่ไม่สามารถผสมเข้ากันได้กับพอลิไวนิลเมทธิลอีเธอร์ นอกจากนี้ยังศึกษาผลของการเติมไซโคลเฮกซิลไบฟีนิลไซโคลเฮกเซน (CBC-33) และกลีเซอรอลมอนอสเตียเรต (GMS) ต่อสมบัติทางความร้อน และความเป็นผลึกของพอลิเมอร์ผสม จากผลการทดลองแสดงให้เห็นว่า ไซโคลเฮกซิลไบฟีนิลไซโคลเฮกเซน และกลีเซอรอลมอนอสเตียเรต ทำให้อุณหภูมิหลอมเหลว (T[subscript m]) ลดลงเล็กน้อย เนื่องจากสารทั้งสองไปลดความหนืดหลอมเหลวของพอลิเมอร์ผสม ทำให้ผลึกสามารถหลอมเหลวได้ง่ายขึ้น และก่อตัวเป็นผลึกได้ช้าลง ซึ่งสัมพันธ์กับอุณหภูมิการเกิดผลึก (T[subscript c]) ที่มีแนวโน้มลดลงเช่นเดียวกัน


SUBJECT

  1. Liquid crystals
  2. Copolymers
  3. Syndiotactic polysturene
  4. ซินดิโอแทคติกโพลิสไตรีน
  5. โพลิเมอร์ผสม
  6. ผลึกเหลว

LOCATIONCALL#STATUS
Central Library @ Chamchuri 10 : Thesis471076 LIB USE ONLY
Engineering Library : Thesisวิทยานิพนธ์ LIB USE ONLY